Thursday, May 28, 2015

Comparison between lamps:                                                                                                                                                                           


Designing of the lighting scheme


(i) Some factors should be considered


(1) Illumination level:

This is the most vital factor because a sufficient illumination is the basic means by where we are able to see our surroundings; it is the task of illumination to give objects a distributed brightness.
Objects which are seen for longer duration of time require more illumination than those for casual work. Similarly moving objects require more illumination than those for stationary object.

(2) Colour of light:

The appearance of the body colour entirely depends upon the colour of the incident light. In general, the composition of the light should be such that the colour appears natural i.e. its appearance by artificial light is not appreciably different from that by daylight.

(3) Shadows:

In lighting installations, formation of long and hard shadow causes fatigue of eyes and therefore is considered to be a short coming. Complete absence of shadows altogether again does not necessarily mean an ideal condition of lighting installations.

(4) Mounting Height:

The mounting height will largely be governed by the type of building and type of lighting scheme employed. In the case of direct lighting, in rooms of large floor area, the luminaries should be mounted as close to the ceiling as possible. Lowering them not only will make the illumination less uniform, but will also bring them more into the field of vision, thus increasing the glare, without causing an appreciable increase in the coefficient of utilization. In the usual case of small rooms with high ceilings, there is something to be gained by lowering the luminaries.

(5) Spacing of luminaries:

Correct spacing is of great importance to provide uniform illumination. With fluorescent luminaries it is good practice to aim at a value of unity for this ratio, and to set an upper limit of (¾) In this case of tungsten lamps combined with focusing reflectors, it is good practice to aim at a horizontal spacing between rows approximately equal to the height of the ceiling above the working plane, and in no case should the horizontal spacing exceed 1 ½ times this height.

(6) Colour of surroundings walls: 

The illumination in any room depends upon the light reflected from the walls and ceiling. White walls and ceiling reflect more light as compared to collared ones.

1 comment:

  1. Casino games, promotions, loyalty rewards, coupons. - DrMCD
    Casino 인천광역 출장마사지 Games - Casino Rewards | Get your casino games. No Deposit, Free 경상남도 출장안마 Chip, No Deposit 부천 출장마사지 needed! Visit 부산광역 출장마사지 our Casino Rewards & Save 대전광역 출장샵 BIG!

    ReplyDelete